Riser

The Renthal Fatbar Lite is the ultimate lightweight, trail-proof aluminum handlebar. Designed and developed to offer the ultimate combination of lightness, strength and durability - The Fatbar Lite is the ideal handlebar for a wide range of disciplines, from trail riding, right through to XC and Enduro racing - Exclusive Series 7 aluminum is heat treated to provide strength and durability - Shot peened to increase fatigue life and durability - Hard anodized to keep your handlebar looking new

A25 Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components

Cycles Camper Riser Bar - Heat-treated aluminum riser bar - Made by Nitto in Japan

Wider than the Clarence, with more room for accessories in the middle - 6061-T6 aluminum with 135mm straight section at the center - Forward bend from clamp area negates the need to change stems to make up for the grip area sweep

- 7050 ProTaper alloy optimizes strength while reducing weight - Cut mark graphics aid in customizing fit

A25Y Alloy Riser Bar - Cut marks provide a range of width options - Textured Grit Grip finish in clamp areas eliminates over-tightening of components

Spiral butted tubing technology is game changing tube extrusion that is more durable, stronger and less weight - 7075 heat treated spiral butted aluminum - Updated graphics and an additional 50mm rise option

- Utilizes a pressure bladder layup process that provides consistent material thickness - Cut marks provide a range of width options from 810mm down to 550mm - Textured Grit Grip finish in clamp area helps to eliminate the possibility of over-tightening - Lifetime crash replacement policy

- The original Chromag bar - Used from XC to DH, the OSX is Chromag's most versatile option - 31.8mm clamp Specs: - Rise: 25mm - Handlebar Width: 800mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Upsweep: 5 degrees - Backsweep: 8 degrees

CrMo with internal taper for best strength-to-weight

Inspired by the BMX bars of yesteryear - 6061 T6 aluminum - Shot peened and anodized black or silver - The 22mm OD crossbar is not there just for strength, but allows installing accessories

Double butted 7075-T6 aluminum bar, designed and tested by Freeride legend Nico Vink - Designed for riders who value strength and reliability over light weight - Increased wall thickness to withstand the toughest abuse

- World Cup DH proven double butted 7075-T6 aluminum bar - Designed with Downhill as well as All Mountain and Enduro riding in mind - 790mm width provides confidence for even the toughest trails

- Reverse Components flagship handlebar reduces vibrations which can cause fatigue on longer runs over rough terrain\n- Carbon construction with Seismic vibration damping technology\n- Unique carbon laminate process makes a handlebar that is both lightweight and strong \n- Tested extensively at the EFBE laboratory in Germany, a pioneer in DIN 79100 test methods

Double butted 7075-T6 aluminum bar, designed and tested by Reverse Team Rider Lukas Knopf - Inscribed with his mantra - life is short - stunt it - Includes cutting lines and stem alignment guide marks

Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep

The Burgtec Ride Wide Alloy DH Handlebars, built for the toughest and most demanding tracks on the planet - 800mm width - 9 degree backsweep - 5 degree upsweep - Suggested cut down marks - Weight: 340g

- Custom swaging process results in the ultimate strength-to-weight ratio - Wide 7075 bars with a 35mm clamp area, 5 degree upsweep and 8-degree backsweep - Features two-tone decals with easy-cut markings

A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9-degree backsweep and 5-degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength-to-weight ratio - Base Handlebar uses 6061 aluminum

When designing the all-new Ridgeline aluminum trail handlebar, our goal was to create the perfect trail bar that disappears beneath you while encouraging you to chase adventure and seek out new experiences wherever possible. We precisely targeted lower rise options at 15mm and 25mm with a stable width of 800mm for a more efficient and aggressive position on the bike. To do this, we took an oversized 35mm bore platform and dispersed the load over an 800mm width. It was critical for us to keep the weight down without sacrificing strength. This is where our unique proprietary Gradient Butting Technology shines, allowing us to remove excess material in areas of less stress and fatigue that can cause the stiff feeling commonly felt with other 35mm handlebars on the market. We can then add material to areas of greater stress and fatigue to increase the long-term strength and durability. This gives you, the rider, more confidence to chase new experiences and forget about the gear beneath you. Our goal is for you to become one with the bike and never let up on chasing your new adventure! - Oversized 35mm Bore Aluminum Handlebar - Designed for Enduro / All Mountain / Trail - Incredibly detailed two-tone bead blasted and polished ano finish - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - 800mm wide - 9 degree bend x 5 degree upsweep - Flex and deflection characteristics designed to match the Skyline handlebar - Features measured cut marks and center alignment detail - Black ano finish with colored graphics - Weight: 303 grams

Take back control with Answer's ProTAPER Carbon 750 bar. Its unidirectional carbon layup is durable and lightweight, and helps isolate high-frequency vibration for less hand and wrist fatigue. Answer makes these bars using an EPS bladder layup process that delivers more consistent wall thickness, which means you get more bang for your carbon buck, combining greater structural integrity with real weight savings. It's the whole package. - Backsweep: 8° - Upsweep: 4°

These dignified bars immediately step up the appearance of any trail rig. - Width: 780mm - Weight: 335g - Clamp Diameter: 31.8mm - Rise: 1-inch, 1/2-inch - Up Sweep: 4° - Back Sweep: 8° - Material: 7050 series alloy

Origin-8's Pro Rise All Mountain Handlebar is made from lightweight, durable 6061-T6 butted aluminum. It provides a 40mm rise with a wrist-friendly 5-degree sweep and a 625mm width.

Origin-8's aluminum Stash Bar Riser handlebar will be right at home on your fixie or urban steed. A generous 25mm riser gives you a great perch to scan the world ahead and it's super narrow so you can dodge and weave with ease. The cool spherical aluminum end caps are removable if you prefer a more muted look.

- Full UD carbon construction - Textured surface at bar clamp and grip areas - 35mm oversized clamp diameter - 800mm width - 7° back sweep - 5° upsweep - ISO-Mountain safety certified - 225g

TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface. - Upsweep: 5° - Backsweep: 9° (760mm bars) - Backsweep: 7° (all other bars)

These 42cm alloy riser handlebars are awesome. Designed by Pure Fix Cycles in California. - Perfect for fixies and urban warrior steeds - 16.5" Wide - 2.25" High - These bars have an ISO standard 25.4mm stem clamp diameter and 22.2mm brake clamp diameter

- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g (15) / ±275g (25) - Diameter (mm): 31,8 - Rise (mm): 15 / 25 - Length (mm): 780 - Geometry (deg°): 5° up x 7° back - Finish: Shot peen anodized, decal logos

- Economical 6066 aluminum alloy mountain handlebar - 800mm width - 3 rise options - Back sweep: 7° - 310-350g (Depending on rise dimension)

The industry’s first all-in-one premium youth components upgrade kit, which is ergonomically optimized to enhance performance and ultimate control. - Includes Slater 90 pedals, Slater 650 bar, Slater Jr. grips, and a Fly Jr. saddle - Includes light plastic 22.2 to 19mm shims, located inside the packaging with the instruction manual - Age: Youth - Rail Material: Steel - Clamp Style: Standard Rails - Material: Synthetic - Length: 235mm - Width: 122mm - Weight: 270g