BMX

All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model fork pushes our Oversized Technology to the extreme as it includes the 1.5 to 1-1/8 inch tapered 7000 series aluminum steerer tube and stiffer 20mm through-axle cold-forged dropouts. Say good-bye to deflection. Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard Oversized Technology™ 1-1/8 to 1.5 Inch 7000 Series Aluminum Steerer Tube 20mm Through-Axle Internal Butterfly Steerer Tube and Fork Crown Interface Cold-Forged and Bonded Dropouts Includes Box One™ Stem Lock Includes Box One™ Fork Adapters Note: Use of a star nut voids the warranty for this product. 20 Inch 24 Inch Material High Modulus Unidirectional Carbon Fiber Steerer Material 7000 Series Aluminum Finish High Gloss Black Offset 32mm Steerer Tube 1-1/8" - 1.5" Weight 579g/20.4oz, 616g/21.7oz FAQ Are these forks compatible with OS 20 Wheels? No. Due to the larger diameter of the wheel, these will not work. The largest compatible tire is 20 x 1.95

All Box One forks are engineered and crafted using our Oversized Technology. These forks are the most critical component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model fork is tailored for larger-sized racers and takes our application of Oversized Technology one step further. It includes a tougher 1-1/8 inch Chromoly steerer tube and stiffer 20mm through-axle cold-forged dropouts. Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard Oversized Technology™ 20mm Through-Axle 1-1/8 Inch Chromoly Steerer Tube Internal Butterfly Steerer Tube and Fork Crown Interface Cold-Forged and Bonded Dropouts Includes Box One™ Stem Lock Includes Box One™ Fork Adapters Note: Use of a star nut voids the warranty for this product. Box Two 1-1/8" Integrated Headset Box One Carbon 45x45 1.1/8" Integrated Headset Box Two Threadless Headset Box Two Headset Spacers Box One Front Load Stem Box One Top Load Stem Box Two Front Load Stem Box Two Top Load Stem Box One Delta Stem Box One Center Clamp Stem Box Two Center Clamp Stem Box Two 20mm Front Hubs 20 Inch 24 Inch Material High Modulus Unidirectional Carbon Fiber Steerer Material Cro-Mo FAQ Are these forks compatible with OS 20 Wheels? No. Due to the larger diameter of the wheel, these will not work. The largest compatible tire is 20 x 1.95. May I use a star nut with this fork? No. You must use the stem lock provided with the fork, or an equivalent expander plug (i.e. Box One Carbon Headset). Use of a star nut is prohibited and voids the warranty for this product. Does this fork fit my frame? To determine compatibility, first examine the head tube of your frame. X5 forks are only compatible with tapered head tubes (see below).

Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 32mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)

Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 25mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)

A true bmx classic. The Hazard Lite is respected because of its strength, reliability and light weight. Often imitated but never matched in quality or durability. The Hazard Lite is the rim of choice for some of the world’s best riders. - Fully welded joint construction - Directional spoke hole drilling

The Seven K-A is a double wall rim that features 34mm width, 17mm height and is made from 7000 series aluminum. - ERD: 390mm

Tested extensively by the Dutch National BMX Team, Damien Godet, Kory Cook, and numerous other elite racers, Box Two™ Freewheels combine durability with lightning-fast engagement. They feature nine, super durable pawls and are available in one of three choices -- 16, 17 or 18 teeth. To install, use the Park Tools™ FR-6 or other installation tool designed for single speed freewheels with four notches that are approximately 32mm across measured inside to inside and 40mm outside to outside. 1/8th or 3/32 Chain Compatible ED Black Protection 108 Points of Engagement 9 Pawls Engagement System Heat-Treated Chromoly Material Chromoly Chain 1/8" or 3/32" Hub Thread 1.375 x 24 TPI Engagement 3.3° [108 clicks] Finish Nickel Plate ED Finish Weight [16T] 163 grams / 5.75 ounces Weight [17T] 170 grams / 5.99 ounces Weight [18T] 176 grams / 6.21 ounces

A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability. - Multi-Butted, traditional 7/8" crossbar for strength - Large radius bends for greater durability - Welded end caps to reduce flex - Post-weld heat-treated for added strength

All Box handlebars are engineered and crafted using our Oversized Technology. Handlebars have a dual purpose as they contribute to both steering and pedaling stiffness. By strategically varying wall thicknesses and tube diameters we have moved material from 3 low stress areas to zones of high load. This has greatly minimized twist and contributed to responsiveness. Concurrently we have increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar deflection and the consequences can lead to poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model handlebar is tailored for medium-sized racers so we decided to use hardened aluminum alloy to reduce unnecessary mass. Oversized™ Technology 31.8 Bar Bore 13 Butted Tubing Knurlee Clamping Area Anodized Finish Laser-Etched Logos 6 6.5 7 Clamp (Ø) 31.8mm Material 6061-T6 Aluminum Sweep 7° back, 2° up Weight 447 grams / 15.8 ounces, 465 grams / 16.4 ounces, 480 grams / 16.8 ounces Width 26.6 inches, 27 inches, 27 inches Please note, the maximum recommended rider weight is 100 pounds.

The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar. - 41-Thermal processed 4130 chromoly - Multi-butted

All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model stem pushes our Oversized Technology to the extreme as it maximizes the shift of material from low stress zones to the Oversized interface. These stems are engineered for the smaller-sized racers. Weight Limit: Meets or exceeds EN Racing 14765 Standard. FEATURES Oversized Stiff Design Oversized Bar Bore Hollow Cro-Mo Clamping Bolts Front-Load Clamp Design Lightweight 3D Cold Forged Design for Superior Strength COMPATIBILITY Box One XS Fork with 1" Steerer Tube Box One XE Fork with 1" Steerer Tube Hex Lab Carbon OS 4.5" 28.6mm Handlebars Hex Lab Carbon OS 6" 28.6mm Handlebars FAQ My handlebars have a 22.2mm Ø stem clamp area, can I use this stem? No, this stem only fits handlebars with 28.6mm Ø stem clamp area. SPECIFICATIONS 40mm 45mm Clamp (Ø) 28.6mm 28.6mm Material 6061-T6 Aluminum 6061-T6 Aluminum Process 3D Cold-Forged 3D Cold-Forged Rise 5° 5° Stack Height 38mm 38mm Steerer Tube 1" 1" Weight 106 grams / 3.7 ounces 115 grams / 3.8 ounces

The Box Two Threadless Alloy 45×45 headset has an all-aluminum construction resulting in a lightweight yet durable headset Each headset is fitted with super-smooth rolling, precision, 45×45 angular-contact sealed bearings Because this versatile headset has 45×45 angular-contact bearings, you can use the included cups and install it in frames with standard head tubes. Or, leave the cup in the box, and use it as an integrated headset

All Box headsets are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars, through the stem-to-bar interface, we arrive at the headset focal point. Since any steering stiffness can easily be lost to headset play, we have concentrated our attention on manufacturing tolerances and quality of materials for the bearing, cnc bearing cover, and crown race. Now that this junction is steadfast you can rest assured that your cockpit’s steering stiffness will transfer on to the fork. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: In this particular model headset we’ve gone to a 1.5” bottom race to fill a tapered head tube. This mates with our oversized X5 carbon fork. Larger and smoother contact areas spread the load effectively and counteract flex. FEATURES CNC'd Aluminum Bearing Cover Aluminum Compression Cap Precision Sealed Bearings Star- Nut Compression System Includes 1.5 Inch Bottom Race Includes 1-1/8 Inch Reducer Race for 1-1/8 Inch Steerer Tube SPECIFICATIONS Bearing Angle 45° x 45° Material Aluminum Recommended Torque 1.5 Nm (Compression Cap) SHIS IS 42/28.6 | IS 52/40 (IS 52/30 w/adapter) Weight 101 grams / 3.6 ounces or 109 grams / 3.8 ounces (w/ adapter) COMPATIBILITY Box One X5 Fork Box One X2 Fork Box One XL Fork Frames with an Integrated NON-Tapered Head Tube FAQ Is this headset compatible with straight steerer-tube forks? Yes this headset comes with a two crown races allowing for compatibility with both 1-1/8" or 1.5 inch steerer-tubes. Is this headset compatible with a non tapered frame? No this headset is ONLY compatible with frames with a tapered integrated headtube. (IS 42/52) What can I use to clean my headset? Box recommends using a light de-greaser or denatured alcohol to clean the outside of the headset, and strongly recommends that a pressure washer is NOT pointed towards the headset when cleaning.

WeThePeople's Socket Pivotal seat post is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and comes in the perfect color and size to match your bike. Plus, there's a 17mm socket head built into the bottom of the post for park-side adjustments to your wheels.

A total redesign of Odyssey's popular MDS sprocket. With a built-in full guard, this sprocket lives up to its name, helping to protect your chain from anything you can throw at it. Sprocket thickness increases towards the guard area for greater strength. Compatible with all chain widths. - 7075 Aluminum

- Super hardened Cr-Mo/Nylon construction - 40 x 100mm - Special insert fits 3/8" or 14mm axles - Diameter: 40mm - 320g (pair) - Material: Chromoly Core w/Nylon Sleeve - Sold in pairs

6061 aluminum with precision sealed mechanism bearing and lower (17mm) stack height.

The Quadrant rim uses a unique pinned junction design that's light and affordable. - 6000 series aluminum - 34 wide, 18mm tall, 392 ERD

WeThePeople's Team Pivotal seatpost is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and it's 200mm long for plenty of adjustability.

Box Two Saddles are the first of their kind, featuring a proprietary co-molded nylon shell and carbon fiber Seatpost. Super lightweight and designed specifically for BMX racing, they feature the Box logo molded into the top and have reduced profiles to prevent snagging on pants. FEATURES 6061 Alloy Post Over-molded Plastic Saddle Impact-Resistant Clear Coat Finish Minimum Insert Indicator SPECIFICATIONS Small Large Saddle Material Co-molded Nylon Shell Co-molded Nylon Shell Saddle Dimensions 165mm x 108mm 216mm x 114mm Seatpost Material Aluminum Aluminum Seatpost Diameter (Ø) 22.2mm 27.2mm Seatpost Length 135mm 135mm Weight 164 grams / 5.8 ounces 204 grams / 7.2 ounces

Odyssey JC/PC Pedals are designed with replaceable pedal bodies, pins, and nuts. - No bearings, adjustable bushing tension - Two-piece plastic bodies with replaceable metal pins and CroMoly spindles

- Super hardened nylon construction - 40mm diameter, 100mm length - Special insert fits 3/8" or 14mm axles - 90g (pair)

The Mike Aitken signature BMX seat is a stylish and durable, that's tear and scuff resistant.

Odyssey racing spokes use butting dimensions that are tailor-made for BMX racing, and they’re still strong enough to handle some light street riding too. You’ll save roughly an ounce per wheel on 36’s. Only the best stainless steel has been used, and the gradual butting transitions are ideal for the stresses that a 20-inch wheel has to endure. - Proprietary professional-grade stainless steel. - BMX specific butting transition dimensions.

Box One Single-Speed Chromoly Cogs are CNC-machined from long-wearing CNC-machined from chrome-molybdenum. It's designed to fit Shimano™ compatible cassette hubs and has a 5mm wide inner base, giving a more solid interface with the cassette body. Shimano™ Compatible Driver 3/32" or 1/8" Chain Compatible Heat-Treated Chromoly Heavy Duty Material: Chromoly Process: Laser-etched logos Weight 13t: 24 grams / 0.85 ounces 14t: 29 grams / 1 ounces 15t: 35 grams / 1.2 ounces 16t: 38 grams / 1.3 ounces 17t: 43 grams / 1.5 ounces 18t: 51 grams / 1.8 ounces

- Forged alloy construction - Double bolt centering design - Oversize 6mm hex bolts

Shimano's DXR V-Brake Levers are the choice of the pros, from the Olympics to the local race scene. They use a 2-finger design with Shimano's proven Super Linear Response system that gives you great power and feel with little effort.

8 spline BMX bottom bracket Spindle with bolts. - Diameter: 19mm - Crank arm Interface: 8-spline - Length: 150mm - Bolts included

- Allows the use of wheels with 3/8" axles to be used with frames or pegs requiring 14mm axles - Durable chromoly construction - Sold in pairs

- 4130 chromoly axle pegs with 3 position anti-rotation set screw - Designed for use with 14mm or 3/8" axles (with adapter) - 4130 chromoly offers a durable, long lasting peg with a smooth grind - 3 set screw positions extend the life the of the peg - Axle: 14mm / 3/8" - Diameter: 35mm - Material: Chromoly - Sold in pairs